What are the reasons for the panel of the gas stove getting hot

When the panel of the stove becomes hot, the common reasons may be insufficient air intake, foreign objects on the fire cover, or the gas source not matching the actual gas source. If you are interested, let's get to know Xiubida together!

Why is the panel of the stove hot

In what degree range is it normal? During the usage process, the panel became hot due to the heat radiation from the fire; The national standard stipulates that a temperature rise within 105 degrees is normal; The temperature rise of the knob is below 35 ℃. What is the phenomenon of yellow flame? What are the important reasons for the occurrence and how should they be handled? The phenomenon where the outer flame of the flame is red can blacken the bottom of the pot in emergency situations. The important reasons and solutions for the occurrence are:

1. Insufficient air intake or improper damper adjustment can be achieved by adjusting the damper;

2. There are foreign objects in the nozzle, trachea, and fire cover. Clean the foreign objects in the nozzle, trachea, and fire cover. Gas stove repair hotline;

3. The repair and after-sales service of the gas stove for the stove does not match the actual gas source used. Replace the stove or change the gas source.

The phenomenon of leaving the flame

What is the phenomenon of leaving the flame? What are the important reasons for the occurrence and how should they be handled? One third of the flames detach from the fire hole and produce a whistling sound. The important reasons and solutions provided for you are: 1. If there is too much air at once or the air damper is not well adjusted, it can be achieved by adjusting the air damper; 2. The applicable gas source for the stove does not match the gas source at the user's home, and the stove should be replaced or the gas source changed; 3. Part of the fire cover holes are blocked, and the fire cover holes are connected; 4. Excessive pressure from the gas source or poor pressure reducing valve.

The phenomenon of tempering

What is the phenomenon of tempering? What are the important reasons for the occurrence and how should they be handled? The phenomenon of flames burning inside the burner, and there will be very loud combustion noise. The important causes and disposal methods are: 1. There is dirt in the fire hole, remove the dirt; The fire cover is not in place, please put it back in place; 2. Low output under heavy pressure, adjust the pressure reducing valve to increase the inflation pressure; 3. The rubber hose is squeezed, eliminating the squeezing phenomenon; 4. Adjust the air door too large, adjust the air door to normal combustion condition;