How to clean oil fume machinery

1. Preparation work

Before starting to clean the oil tobacco machinery, you need to do some preparatory work. Firstly, you need to prepare some cleaning tools, including cleaning agents, rubber gloves, masks, spray cans, newspapers, and waste paper. In addition, you also need to prepare some auxiliary tools, such as wire and plastic bags.

2. Dismantling oil tobacco machinery

The first step in cleaning the oil tobacco machinery is to disassemble it. Firstly, you need to dismantle the filter screen of the oil tobacco machinery, which can usually be done by gently pulling the filter screen. Then, you need to dismantle the lampshade and lighting fixtures of the oil tobacco machinery. When disassembling lampshades and lighting fixtures, you need to be careful not to damage them.

3. Clean the filter screen

Once you disassemble the filter of the oil tobacco machine, you need to put it in water, add cleaning agent, and gently rub it with your fingers. If there are stubborn stains on the filter screen, you can use a small wire brush to gently scrub the filter screen. After washing, you need to put the filter into water and rub it with your fingers until the water becomes clear.

4. Clean the surface of oil tobacco machinery

When cleaning the surface of oil tobacco machinery, you need to use cleaning agents and newspapers to wipe it. Firstly, spray the cleaning agent onto the surface of the oil tobacco machinery, and then wipe it with newspaper. This can remove stains on the surface of oil tobacco machinery without leaving any traces. When cleaning the surface of oil tobacco machinery, you need to pay special attention to the control panel and corners, which are generally the most prone to accumulating stains.

5. Cleaning the interior of oil tobacco machinery

When cleaning the interior of oil tobacco machinery, you need to use waste paper to absorb oil stains. Firstly, dry the moisture inside the oil tobacco machine, and then put the waste paper into the oil tobacco machine to absorb the remaining oil stains. When cleaning the interior of oil tobacco machinery, you need to pay special attention to the fan and motor parts, which are generally the most prone to accumulating oil stains.

6. Reassemble the oil tobacco machinery

After cleaning the oil tobacco machinery, you need to reassemble it. Firstly, you need to place the filter into the oil tobacco machine, and then install the lampshade and lighting fixture back in place. When reassembling the oil tobacco machinery, you need to be careful to ensure that every component is installed correctly.

7. Maintenance and upkeep

Cleaning oil tobacco machinery is a particularly important household task, but it is not a one-time job. In order to maintain the cleaning and hygiene of the oil tobacco machinery, you need to carry out regular maintenance and upkeep. You can perform a simple cleaning once a month and a deep cleaning once a quarter. In addition, you should also replace the filter screen once a year.

8. Easy to see problem-solving

When cleaning oil tobacco machinery, you may encounter some common problems. For example, stubborn stains on the filter screen and noise from the mechanical interior of the oil fume hood. For this type of problem, this article will provide you with some solutions. For example, for stubborn stains, you can use wire to make a small brush and gently scrub the filter. For noise issues, you can check if the fan and motor parts are installed correctly, and if necessary, replace the components.