house extension|commercial builder|property maintenance|electrical repair|commercial renovationoffice fit out|shop refurbishment
The specific steps are as follows:
1. Open the treadmill cover and find the speed sensor.
2. Use a screwdriver to adjust the position of the sensor to maintain an appropriate distance from the running belt.
3. Restart the treadmill and observe if the E7 fault code is still displayed.
4. Checking the tension of the running belt can also affect the operation of the speed sensor.
The tension of the running belt can be checked and adjusted through the following methods:
1. Turn off the treadmill power and unplug the power plug.
2. Open the treadmill cover and find the belt tensioning device.
3. Use a wrench or screwdriver to adjust the tensioning device to maintain appropriate tension on the running belt.
4. Restart the treadmill and observe if the E7 fault code is still displayed.
If none of the above methods can solve the problem, it may be necessary to replace the speed sensor. Hundreds of repair websites will find professional repair technicians to solve various sudden faults of treadmills for you
Share this post: